Wayne Sander, Technical Director, Environment & Advisory at Aurecon, discusses a revolutionary approach to the delivery of telecommunications infrastructure that can reduce costs by 60 per cent in comparison to traditional methods.
Network operators want to deliver mobile and wireless telecommunications infrastructure quickly and economically to meet ever growing user demands.
Large scale national telecommunications projects can require anywhere up to 2 000 base stations, each one needing a point to point link into the wider network via a microwave transmission dish. As such, these sites must be located where ‘Line of Sight’ (LOS) has been verified allowing the site to transmit and receive data from the network without interference from obstructions such as trees, terrain or infrastructure.
Typically, to determine the suitability of a particular location for a telecommunications tower, an elevated work platform (EWP) is hired and transported to a site to test the line of sight. The EWP is used to shoot to an existing tower, a blimp or a second elevated work platform to ascertain whether there are any obstructions.
Limitations of this method include:
LIDAR (Light Detection and Ranging) is an alternative to traditional methods that has significant benefits for network operators. Light aircraft, fitted with this technology, capture data by laser and are capable of mapping ground and non-ground data over a path of up to 1 500 metres in width.
The laser has the capability of striking the same point on the ground four times over, each providing return data capable of determining the height of the ground but also the nature of the strike. That is, the laser is capable of deciphering whether the strike is ground, building, tree or water. The technology has been developed to a point where a species of plant can be identified. As the plane travels at speeds in excess of 250 km/h, more than 30 path profiles can be captured in a single day compared to approximately two paths per day using EWPs.
LIDAR syncs with GPS and an Inertial Measurement Unit (IMU) to correct data, providing relative accuracy of 100 mm end to end of the path scanned.
While it is not a new technology (LIDAR has been fully developed worldwide for atmospheric research and meteorology), the benefits of its use on large scale projects have only been realised through the efforts of Aurecon’s GIS (Geographic Information Systems) and telecommunications teams.
Even though LIDAR cannot capture data through cloud or fog, with its high speed data capture, it can capitalise on clear weather windows by capturing data over a large area. LIDAR doesn’t rely on light and is equally efficient in capturing data at night, a time when clearer conditions often present.
Other advantages of LIDAR over traditional methods include:
The table below shows the efficiencies of LIDAR in capturing 27 paths in the Cairns area.
The outcome of a flight is a file consisting of billions of points of data which can then be imported in to ArcGIS system and used to build detailed elevated models (DEMs).
Aurecon’s GIS experts are able to process LIDAR data and present it in a variety of ways.
Algorithms are incorporated to depict Fresnel Zone (FZ), the area around the proposed microwave path that must be clear of obstruction to allow property connectivity. Individual trees, including the identification of species, can be picked up from LIDAR data and mapped or monitored for FZ intrusion.
The data can be overlaid on other GIS layers including cadastre, land-use and height zones. This allows the modelling of the path against future obstructions including development to approved height zones and projected tree growth by species.
The GIS-centred approach also facilitates integration between transmission and radio frequency coverage planning processes. Viewshed and inter-visibility analysis on regional detailed elevation models allows rapid identification of alternative candidate sites and fatal flaws based on land-use, tenure, accessibility, and so on.
The adoption of this technology is providing real time and cost benefits over traditional LOS techniques. While work for LOS checks via EWPs still remains the most cost efficient method for projects requiring few paths, LIDAR’s effectiveness and accuracy will ensure that its role in the telecommunications market will expand as strict budget and time deadlines apply. LIDAR is also utilised to capture accurate topographical and vegetation information for new road, rail and pipeline projects.
This article was first published in Consulting Matters.
About Wayne Sander
Wayne has 15 years of experience in the site acquisition and project management of mobile telecommunications infrastructure. He is responsible for coordinating property, planning and engineering elements effectively to meet strict client deadlines. Wayne’s strength lies in identifying efficiencies on telecommunications projects to reduce time and cost for the benefit of Aurecon’s clients.